Welcome to visit Sichuan zhuoan new materials technology co.,LTD! 中文站| English
(86)28 85509614

Products

You only need a phone we will provide the most suitable products

Tel phone
(86)28-8702-2290

News

flame retardant IFR101A

  • Number:
  • Specif:
  • Size:
  • Category:Oil-based flame retardant
  • Gotline:(86)28-8550-9614
  • Details

IFR101A  TDS    PDF format

Brief description


       IFR101A ,which is exclusively used for fireproof coating, is compounded by common chemical materials,such as,acid resource,carbon resource,and gas resource.During producing,you just need to add a little additive,besides,it is environmental

Mainly features


       The advantages of IFR 101A

NO. catalogue classic system IFR 101A
1 Material three raw materials,such as,ammonium polyphosphate, pentaerythritol and melamine A single component.So it can effectively save time and manpower.
 
2 Balling mill time Because of three different fineness of raw materials,it needs 60-100 minutes to achieve uniform mixing.It is higher power consumption About 400 mesh in all,which can greatly reduce the milling time (only needs 25-40 minutes), saving energy and reducing resource costs. 
3 Adding
amount
40-50% 26-35%
4 Product Performance  Many types materials,so it is not stable enough, and will migrate the durability.  Single component, high molecular weight, good compatibility with the substrate, good durability, excellent flame retardant effect, stable performance, which can ensure the fireproof performance is less affected by the flame retardant.
5 The product cost  The price is slightly lower, but the additive amount is large, so the cost of coating increased, more milling time , more power consumption. Slight higher for price , but the amount far less, so the entire coating can be flat or lower; Milling time is short,energy savings is slight.
 
 
       Comparison foaming times and additive amount with classic system
 
Foaming times Additive amount(KG)
(IFR101A)
Additive amount(KG)
(Classic system )
10 times 260 380
20 times 350 500
30 times 400 600


Application


        As an raw of material,it is suitable for all kinds of solvent-based fire-retardant coating(ultra-thin steel fire-retardant coating, thin steel fire-retardant coating, electric cable fire retardant coating, etc),and PP / PE plastic flame retardant

Specification


No. Inspection item Technical requirements
1 moisture ≤0.5%
2 fineness ≥95%
3 bulk density ≤0.8 g/ml
4 nitrogen(N) ≥10.5%
5 phosphorus(P) ≥8.0%
 

PACKAGE&SHIPPING


woven PE bag, 25kg / bag, 18bags/pallet,

Attention:12 months minimum at 25℃(77℉). Subject to re-inspection thereafter. Store in dry,shaded conditions away from sources of heat and ignition.

Order:flame retardant IFR101A

Related products